Global
Updated: January 21, 2024
Menu
A member of the Omnia Group
Equipment
Non-Electric
Initiation
Surface, Underground
Product Description
Viperdet MS Dual is a non-electric detonator assembly with a high strength in-hole detonator on one end and a low shrapnel surface detonator in a colour coded connector on the other. A colour coded label marked with the specified delay is attached to the shock tube within 10cm of the connector.
Application
Viperdet MS Dual is used for initiation of explosives in open-pit mines, underground non-coal and non-methane mines, quarries and construction works. Viperdet MS Dual detonators may be used in underground mines, where there is no coal dust and/or methane explosion hazard. The connector can hold up to 6 shock tubes and is designed to ensure easy connection, and reliable initiation while minimizing shrapnel damage to the shock tube.
Product Specifications
Detonator strength: In-hole No. 8, Surface No. 3.
Shell material: Aluminium.
Shock tube: Triple extruded polyethylene exterior over surlyn inner.
Connector material: PE.
Nominal VOD of shock tube: 2000 m/s.
Resistance to hydrostatic pressure: 48 hrs at 1 MPa.
Guidelines for Use
Priming and Initiation
Maximum number of shock tubes inserted into a Viperdet Trunkline connector is six (6).
Primary initiation by electronic detonator, electric detonator, or shock tube starter.
Never:
- Insert detonating chord into the surface detonator connector.
- Stretch shock tube to the point of breaking.
Avoid pinching off shock tubes during loading and stemming.
For underwater blasting, please consult your BME Technical Representative.
Ground Temperature
This product may be used in ground temperatures up to a maximum of 65°C (150°F). If the application requires use outside of this temperature range please contact a BME Technical Representative for additional guidance.
Delay Times
Packaging
PE bags filled with bundles of 5 non-electric detonators with the same delay time. Number of detonators per box depends on length of the shock tube.
Shipping container
Cardboard box.
Cargo safety measures
Shipping containers are placed on a wooden pallet and secured with stretch film.
Remarks
Other packaging configurations are available. Contact your BME Sales Representative for options.
Handling and Storage
Shelf life
36 months from the date of production. Store under recommended conditions.
Storage conditions
Minimum storage temperature (- 45°C) and maximum storage temperature (+65°C). The product should be stored in its original packaging.
Disposal
Disposal of expired non-electric detonators and its packaging should conducted of by authorized personnel and/or companies.
UN Classification for Transportation and Storage
Proper shipping name
Detonator assemblies, non-electric.
Class
1
Division
1.1 B (UN 0360).
1.4 B (UN 0361).
1.4 S (UN 0500).
Safe Use
- Never fight explosive fires.
- Refer to Safety Data Sheet (SDS) for first aid information.
- All explosives must be transported and stored in accordance to relevant regulations.
- All explosives are classified as dangerous goods and may cause damage to property, personal harm, or death, if not used correctly.
- Always keep products away from sources of heat, sparks, flame or hot surfaces and avoid mixing with combustibles or incompatible materials.
In case of emergencies, click here to contact our team for assistance.
All rights reserved. To the maximum extent permitted by law.
Omnia disclaims all liability whatsoever, whether arising in contract, delict (including negligence) or otherwise in relation to the use of any products/solutions or services and all implied warranties, terms and conditions relating to the products/solutions or services (whether implied by statue, common law or otherwise), including (without limitation) any warranty, term or condition as to accuracy, completeness, satisfactory quality, performance, fitness for purpose or any special purpose, non-infringement, information accuracy, as between Omnia and you, are hereby excluded. Omnia specifically disclaims liability and will not be responsible for, any liability or damages, howsoever arising, resulting from the use or reliance upon the information in this document.
You assume sole responsibility for results obtained from the use of the products/solutions or services, and for conclusions drawn from such use.
© Omnia Group (Pty) Ltd
