Canada, USA
Updated: May 12, 2022
Menu
A member of the Omnia Group
Product
Packaged
Explosive
Aluminized, Booster Sensitive, Cross-Linked Emulsion
Construction, Mining, Quarrying
Surface
Product Description
Innopak CXL is a packaged, booster sensitive, cross-linked, water resistant, high-energy emulsion.
Innopak CXL AL is a packaged, booster sensitive, cross-linked, water resistant, aluminized, high-energy emulsion.
Innopak CXL MS is a packaged, booster sensitive, cross-linked, water resistant, aluminized, high energy emulsion with solid sensitizers for an increased level of resistance to excessive shock from adjacent blast holes.
Application
Innopak CXL series products are suitable for surface applications and their water resistant characteristics make them suitable for use in small to large diameter wet holes.
Technical Properties
Velocity of Detonation (VOD): 3500 m/s to 6200 m/s (11,500 ft/s to 20,340 ft/s) dependent on application, diameter, confinement and density.
RWS and RBS calculated with ANFO density 0.80 g/cc and effective energy 2.260 kJ/kg.
Guidelines for Use
Priming and Initiation
Innopak CXL is booster sensitive. Minimum primer is a 227 g (1/2 lb) cast booster initiated by a high strength detonator (No. 8 strength or greater base charge).
Innopak CXL cannot be directly initiated with detonating cord or detonators.
Always allow Innopak CXL ample time to warm to borehole temperature.
Consult with a BME Technical Representative for additional priming and initiation guidance.
Blasthole Charge Length, Hole Diameter and Density Relationships
Maximum hole depth depends on product selection, hole diameter, product densities, and the presence of water. Please contact a BME Technical Representative for additional guidance.
Ground Temperature
This product may be used in ground temperatures from to a maximum of 65°C (150°F) . If the application requires use outside this temperature range please contact a BME Technical Representative for additional guidance.
Reactive Ground
This product is not formulated for use in reactive ground. Reactive ground is typically characterised by the presence of sulphide mineralization. If the application requires use in known reactive ground, or in untested sulphide bearing ground, please contact a BME Technical Representative for additional guidance.
Handling and Storage
All explosives must be transported and stored in accordance with local, state and federal regulations.
Innopak products should be kept at temperatures between –15°C (5°F) and 55°C (131°F) prior to initiation.
Shelf life is 12 months from date of manufacturing and when stored at temperature conditions between –20°C (–4°F) and 40°C (104°F).
Packaging
Innopak CXL MS products are only available in Valeron film.
Packaging Sizes
CXL MS case dimensions (L × W × H):
a) 445 mm × 325 mm × 273 mm (17-1/2 in × 12-3/4 in × 10-3/4 in)
b) 850 mm × 250 mm × 184 mm (33-1/2 in × 9-13/16 in × 7-1/4 in)
c) 1067 mm × 940 mm × 787 mm (42 in × 37 in × 31 in)
*Nominal gross case weight: 25 kg (55 lb)
**Nominal gross case weight: 26 kg (57 lb)
***Nominal gross case weight: 27 kg (60 lb)
Woven Shot Bags
Case dimensions (L × W × H): 1067 mm × 940 mm × 787 mm (42 in × 37 in × 31 in)
Product Risk Profile
All explosives are classified as dangerous goods and may cause damage to property, personal harm, or death, if not used correctly. Risk of explosion by shock, friction, fire, or other ignition sources. Classified as hazardous substance, dangerous goods with mass-explosion hazard. Stable under normal storage conditions.
Temperatures above 65°C (150°F) can be hazardous.
Never load a borehole containing hot or burning material.
Never attempt to fight explosives fires.
Never force explosive materials into a borehole.
Refer to Safety Data Sheet for First-Aid information.
UN Classification for Transportation and Storage
Class 1.5 D, PG II, UN 0332, EXPLOSIVES, BLASTING, Type E
Safe Use
- Never fight explosive fires.
- Refer to Safety Data Sheet (SDS) for first aid information.
- All explosives must be transported and stored in accordance to relevant regulations.
- All explosives are classified as dangerous goods and may cause damage to property, personal harm, or death, if not used correctly.
- Always keep products away from sources of heat, sparks, flame or hot surfaces and avoid mixing with combustibles or incompatible materials.
In case of emergencies, click here to contact our team for assistance.
All rights reserved. To the maximum extent permitted by law.
Omnia disclaims all liability whatsoever, whether arising in contract, delict (including negligence) or otherwise in relation to the use of any products/solutions or services and all implied warranties, terms and conditions relating to the products/solutions or services (whether implied by statue, common law or otherwise), including (without limitation) any warranty, term or condition as to accuracy, completeness, satisfactory quality, performance, fitness for purpose or any special purpose, non-infringement, information accuracy, as between Omnia and you, are hereby excluded. Omnia specifically disclaims liability and will not be responsible for, any liability or damages, howsoever arising, resulting from the use or reliance upon the information in this document.
You assume sole responsibility for results obtained from the use of the products/solutions or services, and for conclusions drawn from such use.
© Omnia Group (Pty) Ltd
Table of Contents
Add a header to begin generating the table of contents
Brand
BME
Innopak
